With the development of science and technology, smart home has entered the days of more and more people. For users who need to install intelligent locks, it is necessary to know the device process and precautions of intelligent locks. What is the process of fingerprint lock device briefly described by Zhongshan fingerprint lock manufacturer?

1. Disassembly: it is mainly necessary to dismantle the original traditional mechanical lock. If the traditional door lock adopts "overlord lock body", the intelligent lock body may be compared from the head, but the number of lock points is not directly proportional to the security. The more critical lock points are firm and reliable. The rest of the lock points are completed through continuous operation. The lock body becomes smaller and the lock points are reduced, which can be said to be shorter and more vigorous;

2. Measurement: during the process of the device, it is required to measure the width and thickness of the door panel and the new lock body, and mark and open holes on the door according to the volume of the existing door lock and the orientation of the bolts;

3. Opening: take out the lock body after measuring relevant data, and cut the door steel body with angle grinder or disc sander;

4. Device lock body and calibration: it is mainly required to fix the lock body, and secondary calibration is required before fixing. The orientation of the lock tongue shall be matched with the original door frame, and measured carefully with caliper and level ruler. More importantly, the door lock shall not be skewed, and the door lock shall not be aligned longitudinally, which will not affect the use, but also affect the beauty.

Article from: Zhongshan fingerprint lock manufacturerhttp://www.zshaochangsheng.com/